product review overlay image

Product Description

Microscope Eyepiece Reticle Micrometer Counting Grid 10x10mm with1mm and 0.1mm divisions within last 2x2mm squares  Available in the following sizes:

  • 24mm only

Information
A reticle is inserted into a 'reticle receptive' microscope eyepiece.  The diameter of the reticle is critical and is different for each make and model of eyepiece, each manufacturer of microscopes uses numerous different eyepieces with different diameters. 

Not all eyepieces can take reticles and some need additional reticle support rings to be fitted. 

Ideally the reticle should be fitted into a special 'focussing/adjustable' eyepiece which, when removed from the microscope eyepiece tube, can be adjusted in length.  This is not the same as eyepiece tube diopter adjustment which is irrelevant.  The purpose of the adjustable eyepiece is to ensure that the image in the reticle is definitely in focus when observing you subject under the microscope.

Only the manufacturer can advise you which size you require, we are unable to advise you which size to purchase unless the microscope was purchased from Cambridge Optics or one of our related businesses such as Ultramacro Ltd.

The reticles we are listing here are not from the microscope manufacturers but are from the principle factory who supply most microscope manufacturers and are of equivalent quality at a much lower price.  Not all reticles listed are held in UK stock and some are only available when sufficient quantities for a batch have been accumulated, therefore occasionally we may have to advise you that there will be a significant delay in supplying the reticle.

Please note that because there are over 600 different types and sizes of reticles available (only a fraction of which are listed here), if there is anything specific you need that you cannot find or if you would prefer a reticle from a specific microscope supplier we can obtain it for you, please enquire.

We regret that because each reticle is essentially a 'rare' part, with little prospect of us being able to resell it in the short term and because they are specially cleaned and sealed prior to shipment, we are unable to accept any returns.

Specifications

Scale Length (mm)
10x10 grid
No. of Divisions
10 and 100
Division Interval (microns)
1000 and 100
CO Verified
Yes
Width
24mm
Material
Optical Glass
Suitable For
All microscopes with a reticle receptive eyepiece
Type
Counting Gris Reticle
Brand
Cambridge Optics
Product Code
CO-ZZFHCW09.934 24mm
Weight
0.2kg

Microscope Eyepiece Reticle Micrometer Counting Grid 10x10mm with 1mm and 0.1mm divisions 24mm Diam.

Product Code CO-ZZFHCW09.934 24mm

Microscope Eyepiece Reticle Micrometer with a crossed Horizontal and Vertical Scales of 10mm with 0.1mm divisions .  Available in the following sizes:

  • 19mm
  • 24mm